2. Card configuration

Here you configure the card hardware.

Hisax Card types (Linux 2.0.36)

• Type Required parameters (in addition to type and protocol)
• 1 Teles 16.0 irq, mem, io
• 2 Teles 8.0 irq, mem
• 3 Teles 16.3 (non PnP) irq, io
• 4 Creatix/Teles PnP irq, io0 (ISAC), io1 (HSCX)
• 5 AVM A1 (Fritz) irq, io
• 6 ELSA PCC/PCF cards io or nothing for autodetect (the iobase is
• required only if you have more than one ELSA
• card in your PC)
• 7 ELSA Quickstep 1000 irq, io (from isapnp setup)
• 8 Teles 16.3 PCMCIA irq, io
• 9 ITK ix1-micro Rev.2 irq, io
• 10 ELSA PCMCIA irq, io (set with card manager)
• 11 Eicon.Diehl Diva ISA PnP irq, io
• 11 Eicon.Diehl Diva PCI no parameter
• 12 ASUS COM ISDNLink irq, io (from isapnp setup)
• 13 HFC-2BS0 based cards irq, io
• 14 Teles 16.3c PnP irq, io
• 15 Sedlbauer Speed Card irq, io
• 15 Sedlbauer PC/104 irq, io
• 15 Sedlbauer Speed PCI no parameter
• 16 USR Sportster internal irq, io
• 17 MIC card irq, io
• 18 ELSA Quickstep 1000PCI no parameter
• 19 Compaq ISDN S0 ISA card irq, io0, io1, io (from isapnp setup io=IO2)
• 20 NETjet PCI card no parameter
• 21 Teles PCI no parameter
• 22 Sedlbauer Speed Star (PCMCIA) irq, io (set with card manager)
• 24 Dr. Neuhaus Niccy PnP irq, io0, io1 (from isapnp setup)
• 24 Dr. Neuhaus Niccy PCI no parameter
• 25 Teles S0Box irq, io (of the used lpt port)
• 26 AVM A1 PCMCIA (Fritz!) irq, io (set with card manager)
• 27 AVM PnP (Fritz!PnP) irq, io (from isapnp setup)
• 27 AVM PCI (Fritz!PCI) no parameter
• 28 Sedlbauer Speed Fax+ irq, io (from isapnp setup)